Mains: 230 V - 50 Hz, Power 1.050 W, Strokes: 0 - 2.700 min-1, Cutting depth max: (metal. wood): 200/ 20 mm

Nabíječka: 3,6 V | 1 300 mAh | Li-Ion Volnoběžné otáčky: 200 / min Max. točivý moment: 3 Nm Nastavení kroutícího momentu: nelze Počet nabíječek: 1

The Einhell CC-BC 10 M Battery Charger is an intelligent battery-charger device adapted to the technically highly developed, high-performance batteries found in modern vehicles.

The Einhell CC-BC 4 M Battery Charger is an intelligent battery-charger device adapted to the technically highly developed, high-performance batteries found in modern vehicles. The intelligent, micro-processor controlled unit is suitable for a wide range of vehicle battery types and comes with a variety of technical safety and maintenance mechanisms. The main focus of development has been on fast, battery-friendly charging, that allows the longest possible lifetime with full performance to be achieved. Operating the charger is more straightforward than with conventional devices thanks to a detailed charge status display. This Einhell all-rounder is suitable for gel batteries, AGM batteries and maintenance-free and low-maintenance lead-acid batteries. The CC-BC 4 M adapts automatically to the battery voltage of 6V and 12V vehicles. The multi-stage charging cycle of the Einhell Battery Charger is automatically monitored and adjusted by the micro-processor controller. The smart control electronics analyze the type and condition of the connected battery, and initiates the most appropriate charging mode to suit what is required. The trickle charge function protects and conserves the battery for a continuously optimum charge level. This makes the CC-BC 4 M suitable for all types of vehicle, particularly seasonal vehicles with long laidup times. Instead of allowing the battery to slowly discharge fully and risking an exhaustive discharge as a result, the battery is kept topped up to its optimum level using trickle charging. The trickle charge relieves the battery cells and extends working life, preventing avoidable, cost-intensive replacement of a defective vehicle battery. Cars, motorbikes and scooters are immediately ready for use at the start of the season. A winter charging mode has been specially developed for outside temperatures below 5° Celsius. Automatic over-charge, short circuit and reverse polarity protection prevents damage to both charger and battery. The Battery Charger is also protection class IP 65-compliant, meaning that it is protected against dust and splash water. The LCD battery voltage and charge status display shows at a glance the current state of the battery and the mode in which the charger is operating. The unit can differentiate between four charging levels and indicate whether a 6- or 12-volt battery is connected. The display on the Einhell Battery Charger also indicates if the clamps have been incorrectly attached, while a warning light alerts the user to possible problems immediately. Thanks to its fully-insulated clamps, the Einhell Battery Charger can be connected easily and safely. The unit also comes with an integrated wall bracket for ease of use and practical storage.

Snadné nastavení krytu kotouče Klíč v přídavné rukojeti Spona na kabel Lehký a kompaktní design

Tichý elektrický drtič GC-RS 2540 CB je silný a spolehlivý nástroj pro rychlé a tiché drcení větví ze stromů, keřů, křoví a zahradního odpadu. Řezací buben s dlouhou životností silou vtahuje materiál do trychtýře.

The GC-RT 7530 electric hoe provides ambitious hobby gardeners with a powerful, light-weight and handy tool for effective loosening of the soil. This tool is equipped with a 2-point safety switch which shuts down the robust cultivator blades as soon as you let go of the switch. The ergonomic long handle of the GC-RT 7530 makes for comfortable operation and can be folded to enable the hoe to be stored in minimum space. A cable-relief clip protects the power cable from wear.

Pracovní výška: 60 – 64 - 68 cm, Délka: 80 cm Průměr polen max: O 40 cm, Max. zatížení: 150 kg

Automatická 12V elektronická nabíječka baterií, zabudovaný ampermetr, silné polové kleště.

Příkon (W): 550 Průtok vzduchu (m3/h): 1150 Kapacita prachového vaku (l): 65

PTC keramický topný článek, 4 nastavení tepelného výkonu (Ventilátor / 1100 W / 1800 W / automatický), elektronický pokojový termostat (15 °C – 30°C), funkce oscilace, časovač pro vypnutí (0.5 – 7.5 hodin), funkce zobrazení pomocí LED displaye, infračervené dálkové ovládání, ochrana proti překlopení (vypne se), ochrana proti přehřátí, On/Off přepínač, vestavěná rukojeť.

Features High quality 2-stroke engine Twin handle including all operational functions Tool-free and universal adjustable twin handle (Bikehandle) made of aluminium for easy and accurate guidance Alu shaft for fatigue-free working Split shaft for easy transport and space saving storage Knife protection cover High-quality 3-teeth blade Twin line spool with automatic jog system High-quality professional comfort carrying belt Quick Start System: well reachable primer (manual fuel pump) and auto choke for quick and easy starting Anti-vibration system Full crank shaft Centrifugal clutch for cutting attachment Decompression valve Spindle-lock system for easy change o cuting equipement Wall holder

Síťová přípojka 230 – 240 V ~ 50 Hz Příkon 450 W Volnoběžné otáčky 6000 min-1 Hloubka řezu 23 mm Pilový kotouč O 85 x O 10 mm Pro vysoce přesné řezy Doraz hloubky řezu

ZKRACOVACÍ, PŘÍČNÁ A POKOSOVÁ PILA Integrovaná kapovací funkce pro široké obrobky Přesné úhlové řezy Součástí je laser (napájený ze sítě) pro přesné vedení řezu TCT pilový kotouč profesionální kvality Síťové napětí 230 V - 240 V ~ 50 Hz Příkon 1600 W S6 20% Rychlost 5000 min-1 TCT pilový kotouč O 210 x O 30 mm Počet zubů 48 Otočný rozsah -47° až +47° Zkosený řez -45° až +45° Max. šířka řezu 310 x 65 mm (při 90o)

Okamžitý start (pozvolný rozběh) Ergonomick á rukojeť Ochrana proti zpětnému rázu s brzdou pro okamžité zastavení řetězu Záchytné čepy řetězu Napínání řetězu bez použití nářadí

Pilový kotouč TC-TS 2031 U lze s úhlovým dorazem nastavit pro pokosové řezy do 45°. I výška stolní kotoučové pily je flexibilně nastavitelná pomocí stupnice

Set Einhell TE-TK 12 Li je univerzální set nářadí pro tvůrčí DIY entuziasty. S výkonnou akumulátorovou vrtačkou / šroubovákem, všestranným multifunkčním nástrojem a praktickou LED svítilnou pro všechny práce kolem domu, dílny a garáže.

The GC-PC 930 I top-handled petrol chain saw is a compact, handy and efficient tool that convinces as a reliable helper for thinning out scrub and removing branches from trees. Starting the engine of this small chain saw is always easy thanks to its choke and primer, and there is even an additional digital ignition for extra support. The GC-PC 930 I comes with good safety features. Pressure on the finger guard will trigger the chain brake and stop the chain within a few milliseconds. Kickback is prevented if the chain becomes jammed in the wood while sawing. A large, robust claw stop made of metal ensures safe handling at all times, and it also serves as a pivot point when sawing horizontal trunks. In idle mode, the centrifugal clutch disengages the chain from the engine. Thanks to the crank shaft with bilateral bearings, the petrol engine runs with very low vibrations. For high user-friendliness even on long work sessions there is also an integrated anti-vibration system. The cutter rail and chain are lubricated automatically by a practical, automatic chain lubrication system. A cutter rail guard is included in delivery to protect the cutter rail and chain during transport and storage. Warning - This chain-saw is for use by trained tree service operators only.